Special Edition Glass Cooling Body for Dynavap

Broke upon inserting a dynavap tip. Cracked instantly.

I'm not sure if mine was a dud or because a helix tip, but disassembly to clean it meant that the glass got teeny micro cracks down the stem. Thought nothing of it, went to heat it, and the thing exploded and sent glass flying everywhere- only had it 4 days, and haven't even dropped it! The colour bead is not coloured at all, and it was off centre from the port hole, making it a clumsy thing to use. Wanted to love it so bad, just think the glass is not to spec.

With the fat mouthpiece and hypercap its a whole new experience

Hit best with a three-way splitter! Thanks vapefiend

So turns out with some added balls this has became a fantastic companion with type of vape that isn't a dynavap, its a bit of a power house and rhymes with shmanvil. Loving this!!

I received this glass stem that's 'for Dynavap' only to discover that it did not fit my Dynavap B. I was told by customer service that this is because for the model B O-rings are required as an additional purchase whereas the other Dynavap models come with O-rings. However, this was not mentioned in the description and I wouldn't have bought this if I had known as it comes to an excessively high total price for what this is. I asked for a refund including the original postage cost due to the lack of information in the listing but was refused a refund of the original postage cost. For some reason they expect a complete newbie to this stuff such as me to have knowledge about these things.

I prefer a glass stem to a metal one and these are great. It has a air hole and a blob of glass on the side of the stem to stop it rolling off a surface. These stems are 95mm long.

The product I bought was exactly what I was after and at a good price, but again the customer service I received from the staff here was first class.

Absolutely love this glass cooling body, personally I feel it provides the best experience when using a Dynavap cap.

It gives a cool, clean & crisp flavour, with no contaminates compared to using a steel or wood body.

It has a carb hole so you can control the amount of air to vapour ratio as well as heat.

It is my go-to Dynavap accessory and use nothing else when at home.

There are a few downsides however.

1. The long version doesn't fit in a Dynavap stash case.
2. My friends say is looks like a crack pipe, so not good when out in public!
3. I have bought roughly ten of these due to being glass and me being a clumsy idiot, they break really easy, especially when you fall asleep on the sofa in front of the TV and it falls out of your hand onto a wooden laminate floor!

Of course, no.3 is par for the course when using anything glass for vaping, especially when dropped onto a hard surface with a hunk of metal shoved in the end. It is amazing the amount of shards of glass it can create when dropped, so it is not recommended while out and about, unless you are super diligent and carry a dust pan and brush with you.

Vapefiend customer service is top notch as expected, and they have even replaced one I was bought for my birthday by my wife, that was broken on arrival without any fuss.

I highly recommend Vapefiend and this glass cooling body, just bear in mind it's glass and it's fragile, so be prepared to have to replace it occasionally, unless you are always super careful and treat it with the respect it deserves!

First glass stem I’ve tried. Quite a different experience to the stock Dynavap stem and took a while to get it but this one’s definitely grown on me.
It looks really funky and there’s a lot of nice touches. It’s very tactile, those little spikes pushed into the tube feel nice on the fingers. I imagine they help with cooling and I’ve no complaints in that department. That bead of glass stops it rolling about if it’s placed on a table and helps with orientation so the shotgun can easily be found.
The serious question here is bead facing up, shotgun to the side or shotgun facing up, bead to the side? It’s a question I keep returning to and one that ultimately cannot be resolved.
As to the shape of the mouthpiece, I’d personally prefer a squarer, somewhat smaller end, but that’s subjective. It would be the absolute business if the end could accommodate a 510 drip tip.
All in all I’m enjoying it and 20 quid well spent. Do I prefer it to the metal Dynavap stem? Not sure, it’s really difficult to say, investigations will continue..

Really happy with this stem, cools brilliantly. Really nice quality, would recommend this over a bb if you're not interested in using it as a WPA. Received great customer service as always from Vapefiend!

Had an issue which was solved incredibly by VapeFiend. Awesome company, great products and customer service. Will be a customer for life.

The stem is a nice collectors piece - well made and very nice looking , also quite usable . Had one of these before without a carb and it highlights the super tight Dynavap draw restriction however this one works great is super cheap and if you like the purity of vaping through glass it's a bit of a no brainer . Vapefiend service exemplary as usual .

Tastes great, and in fairness I dropped the first one. But the second broke whilst sitting on my dynastash.
Won't be trying again
The £15 glass Charlie I got sent accidentally feels thicker, stronger and is surviving well.
Customer service, excellent as always.

This was my second glass Charlie special edition. I drunkenly dropped the first and it broke, my faul. However, the second broke on day two whilst standing upright on my dynastash. Picked it up and it had popped out a chunk of glass near the vapcap end.
It's a shame because the taste is lovely.

brilliant, a little learning, nothing to hard, sweet smooth draws, quite cool vapour, love the rolling beads cannot go wrong for the price or the team at vapefiend

Vapefiend has become my go to vape shop for accessories recently! The shipping is always really quick, and the team seem really passionate about all the products they sell. I think they’ve given the UK vape market a really solid variety of choice!

There’s quite a few glass stems out there, but I chose this particular one because I think it’s the longest? and it has a carb hole! It’s been very effective in cooling vapour, and controlling the siiiiiicCkK riPs. (☠️) I ordered the fat mouthpiece as well, which actually fits nicely onto the glass stem. I find it doesn’t really fit the 2020 M body at all, so I’m glad I can use it with the glass stem!

Anyway, It’s a cool little piece to add to your dyna with some chef’s kiss vapour!

As usual the service from vapefiend was spot on, immediately despatched...

The glass cooling stem is a game changer for the Dynavap, taste is absolutely amazing now , Still good with the s/s body but no going back for me after trying this. It also has a carb hole which I couldn't find with similar stems which for me is essential.

If the Dynavap is your go to vape then couldn't recommend this enough to enhance your experience.

Great product line but ultimately the customer service is 10/10 and a great business