• Next Day Delivery

    Order by 2pm Mon-Fri

  • Stealth Packaging

    Plain box with no name or branding

  • Customer Helpline

    0345 5480 420

NewVape  |  SKU: NE-3315

Flowerpot F16 "Injector" Head Assembly (7051)

£87.19 £108.99
VAT included Shipping calculated at checkout.

Earn [points_amount] when you buy this item.

Delivery & Shipping

We have a variety of delivery options available at checkout.

  • Standard Delivery (2-4 Days) | Free over £20
  • Royal Mail 24 | Free over £50
  • RM Special Delivery by 1pm | Free over £200
  • DPD Next Day (M-F) | Free over £100
  • DPD Saturday Delivery | £6.95-£12
  • Wholesale Next Day £10

You'll need to order by 2pm Mon-Fri for Same Day Dispatch!

Warranty Information

Our in-house technicians can solve any problems or faults right here in the UK,
saving you the hassle of shipping your vape abroad if it goes wrong.

Just fill out our warranty enquiry form, and let us handle the rest!

If you get stuck, please email us or give us a call at 0345 5480 420

Our office hours are 9am - 6pm | Mon - Sat

Continuing the evolution....

The new Flowerpot F16 head is created at a time where ball vapes require some refinement. This new flowerpot head packs a punch as the heat sink is improved by the addition of a solid titanium machined cap and a machined screen at the bottom which further improves the conduction and retention of heat throughout the device. 

There are two barrel designs, the F16 barrel is an injector style "male" head which will sit inside the shovelhead bowl and any other injector style bowl. The exposed 20mm coil design allows us to keep the cost down while offering full functionality. 

This design has taken the guesswork out of assembly and disassembly, so you can now switch between heads or disassemble for cleaning with ease. 

The machined cap is a threaded cap with styled grip notches for ease of assembly and disassembly. 

The TOMCAT option will turn your F16 body into a Dual Use head. This means that you will have an injector and a standard diffuser in one head.

The titanium drop in screen is tumbled to remove burrs but tumbling also causes the change in its finish color. 

It has been argued in the community that there is a difference in flavor between the mesh screens and the solid titanium machined screens. This is due to using it at lower temps. Lower temps = More flavor.

  • About 180 3mm Rubies until full.
  • About 68  4mm Rubies until full. 

Recommended starting temperature on this one is 560F

The Flowerpot F16 Head includes:

  • Flowerpot F16 Injector Barrel (3465)
  • Drop in Machined Screen (3468)
  • Machined Intake Cap (3467) OR Tomcat Conversion Cap (3477)
  • 4mm Rubies

WARNING! Must use more rubies than you may think. The level of the balls must exceed the brim in order for the threaded cap to put downward pressure on the balls and hence on the removable machined screen. Too few rubies could cause the screen to spin on an axis and spillage may occur. 

 - About 180 3mm Rubies until full.

- About 68  4mm Rubies until full. 

- Coil NOT Included

Flowerpot F16 "Injector" Head Assembly (7051) - Vapefiend UK
NewVape

Flowerpot F16 "Injector" Head Assembly (7051)

£87.19 £108.99
Continuing the evolution....

The new Flowerpot F16 head is created at a time where ball vapes require some refinement. This new flowerpot head packs a punch as the heat sink is improved by the addition of a solid titanium machined cap and a machined screen at the bottom which further improves the conduction and retention of heat throughout the device. 

There are two barrel designs, the F16 barrel is an injector style "male" head which will sit inside the shovelhead bowl and any other injector style bowl. The exposed 20mm coil design allows us to keep the cost down while offering full functionality. 

This design has taken the guesswork out of assembly and disassembly, so you can now switch between heads or disassemble for cleaning with ease. 

The machined cap is a threaded cap with styled grip notches for ease of assembly and disassembly. 

The TOMCAT option will turn your F16 body into a Dual Use head. This means that you will have an injector and a standard diffuser in one head.

The titanium drop in screen is tumbled to remove burrs but tumbling also causes the change in its finish color. 

It has been argued in the community that there is a difference in flavor between the mesh screens and the solid titanium machined screens. This is due to using it at lower temps. Lower temps = More flavor.

Recommended starting temperature on this one is 560F

The Flowerpot F16 Head includes:

WARNING! Must use more rubies than you may think. The level of the balls must exceed the brim in order for the threaded cap to put downward pressure on the balls and hence on the removable machined screen. Too few rubies could cause the screen to spin on an axis and spillage may occur. 

 - About 180 3mm Rubies until full.

- About 68  4mm Rubies until full. 

- Coil NOT Included

View product